Cisco 300-165 Actual Exam Questions Answers

That should be enough to get you to pass your Cisco 300-165 exam. However, if you end up failing anyway, you can contact us right away to get your money back.

Try it Latest DumpsSchool 300-165 Exam dumps. Buy Full File here: https://www.dumpsschool.com/300-165-exam-dumps.html (327 As Dumps)

Download the DumpsSchool 300-165 braindumps from Google Drive: https://drive.google.com/file/d/1NI9IT8UmMnEM62DJ8Hm1Vl9uYDiz9wr_/view (FREE VERSION!!!)

Question No. 1

Which three options are capabilities of the Cisco Nexus 7000 Series Supervisor Module? (Choose three.)

Answer: B, D, E

Question No. 2

You plan to configure a SAN zone set. Which two facts should you consider before you configure the SAN zone set? (Choose two)

Answer: B, E

Question No. 3

Refer to the exhibit.

Which IP address does N9K-1 use to represent itself when connecting to a remote NVE peer?

Answer: A

Question No. 4

Which two types of traffic are carried over a vPC peer link when no failure scenarios are present? (Choose two.)

Answer: A, C

The vPC peer link is the link used to synchronize states between the vPC peer devices. The vPC peer link carries control traffic between two vPC switches and also multicast, broadcast data traffic. In some link failure scenarios, it also carries unicast traffic. You should have at least two 10 Gigabit Ethernet interfaces for peer links.

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000-series-switches/configuration_guide_c07-543563.html

Question No. 5

When a local RBAC user account has the same name as a remote user account on an AAA server, what happens when a user with that name logs into a Cisco Nexus switch?

Answer: C

If you have a user account configured on the local Cisco NX-OS device that has the same name as a remote user account on an AAA server, the Cisco NX-OS software applies the user roles for the local user account to the remote user, not the user roles configured on the AAA server.

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_nx-os-cfg/sec_rbac.html

Question No. 6

Which two security features are only supported on the Cisco Nexus 7000 Series Switches? (Choose two.)

Answer: B, F

A traffic storm occurs when packets flood the LAN, creating excessive traffic and degrading network performance. You can use the traffic storm control feature to prevent disruptions on Layer 2 ports by a broadcast, multicast, or unicast traffic storm on physical interfaces.

Traffic storm control (also called traffic suppression) allows you to monitor the levels of the incoming broadcast, multicast, and unicast traffic over a 10-millisecond interval. During this interval, the traffic level, which is a percentage of the total available bandwidth of the port, is compared with the traffic storm control level that you configured. When the ingress traffic reaches the traffic storm control level that is configured on the port, traffic storm control drops the traffic until the interval ends.

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/dcnm/security/configuration/guide/b_Cisco_DCNM_Security_Configuration_Guide__Release_5-x/Cisco_DCNM_Security_Configuration_Guide__Release_5-x_chapter17.html

And http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/dcnm/security/configuration/guide/b_Cisco_DCNM_Security_Configuration_Guide__Release_5-x/Cisco_DCNM_Security_Configuration_Guide__Release_5-x_chapter1.html

Question No. 7

Refer to the exhibit.

What is the result?

Answer: D

Question No. 8

Which topology is not supported when using vPC?

Answer: C

The figure shows unsupported topology where a vPC is between hosts and two FEXs that are connected to one Cisco Nexus 5500 Series device. This topology does not provide a good high availability solution because the server loses the connectivity to the network when the Cisco Nexus 5000 Series device fails.

Figure: Unsupported Topology—Host vPC With One Cisco Nexus 5000 Series Device

If you need to connect a multi-homing server to a pair of FEXs when there is only one Cisco Nexus 5000 Series device, you have the option to run active or standby NIC teaming from the server.

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/mkt_ops_guides/513_n1_1/n5k_enhanced_vpc.html

Question No. 9

Which command should you run to enforce SNMP message encryption for all SNMPv3 communications?

Answer: C

Question No. 10

Which option shows how to configure an ERSPAN Type III source session in Cisco NX-OS 6.2?

Answer: C

300-165 Dumps Google Drive: (Limited Version!!!)
https://drive.google.com/file/d/1NI9IT8UmMnEM62DJ8Hm1Vl9uYDiz9wr_/view

Related Certification: CCNP Data Center dumps