Try Updated Cisco 300-075 Exam Questions – [Jan-2018 Dumps]

The success in Cisco Certified Network Professional Collaboration 300-075 certification exam is very easy . Your success will give you a lot more in form of your professional development in Video,Video Programming and Cisco Video. The Cisco 300-075 exam practice test software comes with money back guarantee, if you fail in the 300-075 exam, you will not be at risk of losing your money at all. We at CCNABraindumps provide you most latest and actual 300-075 exam questions.

♥♥ 2018 NEW RECOMMEND 300-075 Exam Questions ♥♥

300-075 exam questions, 300-075 PDF dumps; 300-075 exam dumps:: https://www.dumpsschool.com/300-075-exam-dumps.html (383 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate Cisco 300-075 Dumps Exam Questions and Answers:

Version: 21
Question: 21

Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:

Locations:

CSS:

SRST:

SRST-BR2-Config:

BR2 Config:

SRSTPSTNCall:

After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of the following reasons could be causing this failure?

A. Device Pool cannot be default.
B. The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
C. The router does not support SRST.
D. The SRST enabled router is not configured correctly.

Answer: A

Question: 22

Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:

Locations:

CSS:

SRST:

SRST-BR2-Config:

BR2 Config:

SRSTPSTNCall:

After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001), the calls fail from the PSTN. Which two of the following configurations if applied to the router, would remedy this situation? (Choose two.)

A. dial-peer voice 1 pots
incoming called-number 228822…
direct-inward-dial
port 0/0/0:15
B. dial-peer voice 1 pots
incoming called-number 228822…
direct-inward-dial
port 0/0/0:13
C. voice translation-rule 1
rule 1/˄228821….S//+44&/
exit
!
voice translation-profile pstn-in
translate called 1
!
voice-port 0/0/0:15
translation-profile incoming pstn-in
D. voice translation-rule 1
rule 1/˄228822….S//+44&/
exit
!
voice translation-profile pstn-in
translate called 1
!
voice-port 0/0/0:15
translation-profile incoming pstn-in
E. The router does not need to be configured.

Answer: A, D

Question: 23

Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?

A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to off.

Answer: A

Question: 24

Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RAS-enabled endpoint that originates from an external zone?

A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS

Answer: C

Question: 25

Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

A. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications Manager.
B. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.
C. The Cisco Unified Communications Manager trunk configuration must have the destination port set to 5061.
D. A SIP trunk security profile must be configured with Device Security Mode set to TLS.
E. A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS certificate.
F. The Cisco Unified Communications Manager zone configured in VCS must have SIP authentication trust mode set to On.
G. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode set to Off.

Answer: A, C, E

Question: 26

You want to avoid unnecessary interworking in Cisco TelePresence Video Communication Server, such as where a call between two H.323 endpoints is made over SIP, or vice vers
a. Which setting is recommended?
A. H.323 – SIP interworking mode. Reject
B. H.323 – SIP interworking mode. On
C. H.323 – SIP interworking mode. Registered only
D. H.323 – SIP interworking mode. Off
E. H.323 – SIP interworking mode. Variable

Answer: C

New Updated 300-075 Exam Questions 300-075 PDF dumps 300-075 practice exam dumps: https://www.dumpsschool.com/300-075-exam-dumps.html